linux yang saya gunakan Ubuntu untuk instal modem mobi,

Langsung masukan modem ke slot pcmcia. Maka ubuntu langsung dapat mendeteksi modem dengan baik, silakan cek Hardware Information yang terletak di menu System > Preferences > Hardware Information. Di situ mobi akan terdaftar sebagai PANTECH USB MODEM. Jika Hardware Information tidak ditemukan, buka terminal dan masukkan perintah

# lsusb

Cari baris : Bus 007 Device 002: ID 106c:3702 Curitel Communications, Inc. Pantech PX-500.

Buka terminal
Jalankan wvdialconf sebagai root. Cek apakah modem terdeteksi dengan baik.

andreas@andreas-desktop:~$ sudo wvdialconf
Editing `/etc/wvdial.conf’.

Scanning your serial ports for a modem.

ttyS0< *1>: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyS0< *1>: ATQ0 V1 E1 — failed with 9600 baud, next try: 115200 baud
ttyS0< *1>: ATQ0 V1 E1 — and failed too at 115200, giving up.
Modem Port Scan< *1>: S1 S2 S3
WvModem< *1>: Cannot get information for serial port.
ttyUSB0< *1>: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyUSB0< *1>: ATQ0 V1 E1 — failed with 9600 baud, next try: 115200 baud
ttyUSB0< *1>: ATQ0 V1 E1 — and failed too at 115200, giving up.
WvModem< *1>: Cannot get information for serial port.
ttyUSB1< *1>: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyUSB1< *1>: ATQ0 V1 E1 — failed with 9600 baud, next try: 115200 baud
ttyUSB1< *1>: ATQ0 V1 E1 — and failed too at 115200, giving up.
WvModem< *1>: Cannot get information for serial port.
ttyUSB2< *1>: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyUSB2< *1>: ATQ0 V1 E1 — failed with 9600 baud, next try: 115200 baud
ttyUSB2< *1>: ATQ0 V1 E1 — and failed too at 115200, giving up.
WvModem< *1>: Cannot get information for serial port.
ttyUSB3< *1>: ATQ0 V1 E1 — OK
ttyUSB3< *1>: ATQ0 V1 E1 Z — OK
ttyUSB3< *1>: ATQ0 V1 E1 S0=0 — OK
ttyUSB3< *1>: ATQ0 V1 E1 S0=0 &C1 — OK
ttyUSB3< *1>: ATQ0 V1 E1 S0=0 &C1 &D2 — OK
ttyUSB3< *1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
ttyUSB3< *1>: Modem Identifier: ATI — Manufacturer: UTStarcom communication Inc.
ttyUSB3< *1>: Speed 4800: AT — OK
ttyUSB3< *1>: Speed 9600: AT — OK
ttyUSB3< *1>: Speed 19200: AT — OK
ttyUSB3< *1>: Speed 38400: AT — OK
ttyUSB3< *1>: Speed 57600: AT — OK
ttyUSB3< *1>: Speed 115200: AT — OK
tyUSB3< *1>: Speed 230400: AT — OK
ttyUSB3< *1>: Speed 460800: AT — OK
ttyUSB3< *1>: Max speed is 460800; that should be safe.
ttyUSB3< *1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
WvModem< *1>: Cannot get information for serial port.
ttyUSB4< *1>: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyUSB4< *1>: ATQ0 V1 E1 — failed with 9600 baud, next try: 115200 baud
ttyUSB4< *1>: ATQ0 V1 E1 — and failed too at 115200, giving up.
WvModem< *1>: Cannot get information for serial port.
ttyUSB5< *1>: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyUSB5< *1>: ATQ0 V1 E1 — failed with 9600 baud, next try: 115200 baud
ttyUSB5< *1>: ATQ0 V1 E1 — and failed too at 115200, giving up.
WvModem< *1>: Cannot get information for serial port.
ttyUSB6< *1>: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyUSB6< *1>: ATQ0 V1 E1 — failed with 9600 baud, next try: 115200 baud
ttyUSB6< *1>: ATQ0 V1 E1 — and failed too at 115200, giving up.
WvModem< *1>: Cannot get information for serial port.
ttyUSB7< *1>: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyUSB7< *1>: ATQ0 V1 E1 — failed with 9600 baud, next try: 115200 baud
ttyUSB7< *1>: ATQ0 V1 E1 — and failed too at 115200, giving up.
WvModem< *1>: Cannot get information for serial port.
ttyUSB8< *1>: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyUSB8< *1>: ATQ0 V1 E1 — failed with 9600 baud, next try: 115200 baud
ttyUSB8< *1>: ATQ0 V1 E1 — and failed too at 115200, giving up.

Found a modem on /dev/ttyUSB3.
Modem configuration written to /etc/wvdial.conf.
ttyUSB3: Speed 460800; init “ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0″

Bagi anda yang menggunakan kabel USB kemungkinan akan memperoleh keluaran sbb:

lina@lina-laptop:~$ sudo wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0 S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyACM0<*1>: ATQ0 V1 E1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyACM0<*1>: Modem Identifier: ATI -- Manufacturer: UTStarcom communication Inc.
ttyACM0<*1>: Speed 4800: AT -- OK
ttyACM0<*1>: Speed 9600: AT -- OK
ttyACM0<*1>: Speed 19200: AT -- OK
ttyACM0<*1>: Speed 38400: AT -- OK
ttyACM0<*1>: Speed 57600: AT -- OK
ttyACM0<*1>: Speed 115200: AT -- OK
ttyACM0<*1>: Speed 230400: AT -- OK
ttyACM0<*1>: Speed 460800: AT -- OK
ttyACM0<*1>: Max speed is 460800; that should be safe.
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK


Found an USB modem on /dev/ttyACM0.
Modem configuration written to /etc/wvdial.conf.
ttyACM0: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"


* Edit wvdial.conf.

sudo nano /etc/wvdial.conf
——————————
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
ISDN = 0
Phone = #777
New PPPD = yes
Modem = /dev/ttyUSB3
Username = 0889140[4 digit nomor mobi]@ev.mobile-8.net
Password = [password mobi]
Baud = 460800
Carrier Check = no

* Cek file :

/etc/ppp/chap-secrets
/etc/ppp/pap-secrets

Pastikan terdapat baris yang berisikan :


“0889140[4 digit nomor mobi]@ev.mobile-8.net” * “[password mobi]”


* Setelah itu, langkah terakhir, jalankan wvdial sebagai root. Voila…


andreas@andreas-desktop:~$ sudo wvdial
WvDial< *1>: WvDial: Internet dialer version 1.56
WvModem< *1>: Cannot get information for serial port.
WvDial< *1>: Initializing modem.
WvDial< *1>: Sending: ATZ
WvDial Modem< *1>: ATZ
WvDial Modem< *1>: OK
WvDial< *1>: Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
WvDial Modem< *1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
WvDial Modem< *1>: OK
WvDial< *1>: Modem initialized.
WvDial< *1>: Sending: ATDT#777
WvDial< *1>: Waiting for carrier.
WvDial Modem< *1>: ATDT#777
WvDial Modem< *1>: CONNECT
WvDial< *1>: Carrier detected. Waiting for prompt.
WvDial Modem< *1>: ~[7f]}#@!}!}!} }5}”}&} }*} } }#}%B#}%}%}&}%[}^} }6N~
WvDial< *1>: PPP negotiation detected.
WvDial: Starting pppd at Thu Apr 2 23:54:53 2009
WvDial: Pid of pppd: 6682
WvDial< *1>: Using interface ppp0
WvDial< *1>: pppd: ��[06][08](�[06][08]
WvDial< *1>: pppd: ��[06][08](�[06][08]
WvDial< *1>: pppd: ��[06][08](�[06][08]
WvDial< *1>: pppd: ��[06][08](�[06][08]
WvDial< *1>: pppd: ��[06][08](�[06][08]
WvDial< *1>: local IP address 10.128.144.173
WvDial< *1>: pppd: ��[06][08](�[06][08]
WvDial< *1>: remote IP address 10.21.9.5
WvDial< *1>: pppd: ��[06][08](�[06][08]
WvDial< *1>: primary DNS address 10.88.77.6
WvDial< *1>: pppd: ��[06][08](�[06][08]
WvDial< *1>: secondary DNS address 10.21.7.7
WvDial< *1>: pppd: ��[06][08](�[06][08]

Anda terkoneksi ke internet…

Jadi setiap kali ingin konek ke internet, tinggal ketik saja wvdial sebagai root di terminal. Cara diskoneknya adalah tinggal ketik saja ctrl-c di terminal yang menjalankan wvdial. Nanti akan secara otomatis terdiskoneksi. Ingin konek otomatis saat ubuntu berjalan, tinggal masukan script wvdial di /etc/init.d/.

Semoga informasi ini berguna. Yang aku pertanyakan : kenapa kok mobile-8 menyatakan tidak mendukung linux? Hari gini gitu lho… Nanti setelah aku mencoba di beberapa kompie lab, dan memastikan berjalan dengan baik, aku akan mengunjungi counter mobile-8 sambil bawa kertas yang berisikan langkah2 memakai mobi di ubuntu. Kurangnya hanya : tidak bisa cek sisa pulsa dan tidak bisa mengetahui log-nya dengan mudah.

more

Internet Murah

Ingin internetan dirumah dengan murah? Dengan kartu im3 kita bias berinternet murah banget. dengan kecepatan 115.2Kb/s (tergantung fitur HaPe yang kita gunakan). Dengan HaPe berfitur GPRS, EDGE atau 3G kita dapat berselancar di dunia maya dengan membeli Pulsa GPRS dengan harga Rp 5000 anda dapat berinternet selama 250 menit, gimana, tertarik?



Yang perlu qm siapkan

* Hape dan kabel data nya
* CD Driver / PC Suit
* Komputer
* Uang 5000, (buat beli Pulsa )



Bila qm menggunakan hp yang disertai PC Suit (misal Sony Ericsson)

* Install PC Suit pada komputer
* Hubungkan HaPe ke PC dengan kabel data
* Pilih Phone mode pada HaPe qm
* PC anda akan otomatis mendetek dan menginstal driver modem.
* setelah selesai masuk pada Program PC Suit
* masuk pada Mobile Networking Wizard
* pilih New Connection, Packet Switched Data
* Pilih modem (HaPe qm yang telah terinstal)
* Isi Connection Name terserah qm
* Pilih - use settings from a existing entry in the mobile phone
* Pilih – indosatgprs
* Isi user ID dan Password : indosat@durasi
* Finish



Mulai internet

* Masuk start menu
* Settings
* Network Connection
* Pilih koneksi yang telah qm buat
* Qm sudah dapat berinternet ria



Untuk HaPe yang ga ada PC Suit

* Pastikan ada CD Driver kabel (DKU, DCU)
* Hubungkan dan instal modem driver kabel
* Selanjutnya silahkan download dan ikuti petunjuk yang pernah diberikan I Care Indosat kepada saya


Check Pulsa GPRS : *388*1#

more